Your question: What is the volume of 1 Litre petrol?

What is the volume of petrol?

petrol: convert weight to volume

Petrol weighs 0.7489 gram per cubic centimeter or 748.9 kilogram per cubic meter, i.e. density of petrol is equal to 748.9 kg/m³. In Imperial or US customary measurement system, the density is equal to 46.7523 pound per cubic foot [lb/ft³], or 0.43289 ounce per cubic inch [oz/inch³] .

How many kg is a litre of petrol?

1 liter of petrol weighs 0.737 kilogram.

What is the volume of 1 litre of gas?

At STP, one mole (6.02 × 1023 representative particles) of any gas occupies a volume of 22.4 L (Figure below). Any gas occupies 22.4 L at standard temperature and pressure (0°C and 1 atm).

How many Litres does 1 litre have?

A litre is a cubic decimetre, which is the volume of a cube 10 centimetres × 10 centimetres × 10 centimetres (1 L ≡ 1 dm31000 cm3). Hence 1 L ≡ 0.001 m3 ≡ 1000 cm3, and 1 m3 (i.e. a cubic metre, which is the SI unit for volume) is exactly 1000 L.

What does 1 Litre fuel weigh?

Density of petrol is 0.77 kg/litre and density of water is 1 kg/litre. This means that 1 litre petrol weighs 770 grams (0.77 kg ) and as that of water weighs 1000 grams (1 kg).

IMPORTANT TO KNOW:  What is the best 20 lb propane tank?

How do you measure fuel volume?

If you’re curious about your fuel tank capacity, here is a simple formula to determine the size of your gas tank in gallons. Simply multiply the length, width, and height (L x W x H) of the gas tank, then divide the total by 231. 231 is the number of cubic inches in one gallon of gasoline.

How many Litres is 1 kg of jet fuel?

Thus, one kilogram of Jet A1 will at most range from a volume of 1.333 to 1.176 litres for the S.G. range of 0.75 to 0.85. For an S.G. of 0.79, one kilogram of Jet A1 would be about 1.266 litres.

How many Litres is 1 kg of oil?

1 KG of oil is equal to 1.1 Litre | GheeStore.

What is the weight of 1 Litre of kerosene?

1 liter of kerosene weighs 0.817 kilogram.

What is STP formula?

What is STP? STP in chemistry is the abbreviation for Standard Temperature and Pressure. STP most commonly is used when performing calculations on gases, such as gas density and is represented as STP = V*(273/T)*(P/100) or stp = Volume of Gas*(273/Temperature of Gas)*(Pressure of Gas/100).

Does 1 Litre weigh 1 kg?

Water has a density of 1 kg /L, that is, 1 liter of water has a mass of exactly 1 kg.

Is 1m3 equal to 1000 Litres?

1 cubic meter is 1000 liters. The simplest way to convert cubic meters to liters is to move the decimal point three places to the right. In other words, multiply a value in cubic meters by 1000 to get the answer in liters.

IMPORTANT TO KNOW:  Why is petrol use in light weight vehicles but diesel is used in heavy trucks?
Oil and Gas Blog