What are the importance of testing of fuel oil onboard?

Regular fuel testing is vital as it ensures that you know that the fuel oil you’re bunkering and use is fit for purpose. There are host of problems that can occur with your fuel, both from the traditional heavy fuel oil to the more modern low sulphur fuels.

What is fuel oil testing?

Fuel oil is tested for quality according to recognized industry standards such as ASTM, ISO and other specifications. … The Intertek fuel oil labs also test fuel oils for trace contaminants, adulterants and other components as required by clients and regulations.

Why is it important to have confirmation of the density of the bunkers from a laboratory report?

Bunker fuel density

It is essential to measure density due to the way fuel is supplied. The fuel is delivered from a bunker barge and the volume of the transfer is measured, often by a meter.

How do you maintain lube oil onboard ships?

8 Ways To Optimize Lubricating Oil Usage On Ships

  1. Study Lubricating Oil Characteristics. …
  2. Prevent Leakages. …
  3. Proper Filtration is Important. …
  4. Regular Testing of Lube Oil is Necessary. …
  5. Check Viscosity of Oils. …
  6. Oil in Water is Dangerous. …
  7. Close Monitoring of Lube Oil Usage in Machinery. …
  8. Education and Training are Important.
IMPORTANT TO KNOW:  Frequent question: What will take kerosene smell out of clothes?

What is the importance of lubricating oils?

Lube oil not only ensures the smooth & resistance free movement of the internal components of an engine by isolating all parts from each other, but it also carries out a number of other very critical tasks such as: Lubrication: It provides lubrication to all the moving parts to reduce friction and wear.

How do you test for contaminated fuel?

Put some of your fuel in a clear and clean container and look at it in good light. Look for dirt or other particles in the fuel, either at the bottom of the container or floating in the fuel. This could be dirt or rust or even algae. Also look for separation – layers in the fuel that might be water or mixed fuel.

How do you test petrol oil?

Fourier-transform infrared (FTIR) spectroscopy is a readily available test that most oil analysis laboratories use. It can detect fuel, but you must have a new oil reference and a fuel reference to know where to look on the spectrum to determine if fuel is in the oil sample.

What are all the tests to be conducted for fuel?

Fuels tested:

  • Petroleum Refined Fuels. Gasoline Testing. Diesel Fuel Testing. Bunker Fuel Testing. LPG Testing.
  • LNG Services.
  • Biofuel Analysis. Biodiesel. Fuel Grade Ethanol.
  • Coal and Pet-Coke.
  • Biomass Fuel. Wood Pellet Testing.
Oil and Gas Blog