If you get dust in the pilot assembly and the pilot needs to be cleaned out, it produces a “lazy” flame, which will be disturbed by the draught of the main burners. The flame lifts away from the thermocouple and causes the temperature on the tip of the thermocouple to drop. This, in turn, makes the gas valve shut off.
Why does my fire pit keep going out?
Another common reason why campfires go out is because the wood is wet. In order for wood to light — and stay lit — it needs to be dry. If it’s too dry, combustion won’t happen; thus, the campfire will likely go out. If you’re camping in an area where there’s little-to-no dry wood, consider bringing your own.
How do you bypass the thermocouple on a propane fire pit?
To bypass the thermocouple:
- Move the tilts switch wire aside.
- Remove your thermocouple from the heater using an 8mm wrench.
- Pull the valve housing aside using your 13mm socket wrench. …
- Remove the valve using your pliers. …
- Put your thermocouple back into position.
Why does my fire table won’t stay lit?
When the pilot won’t light, you can often trace the problem to a lack of propane, either because the tank is empty or a valve is closed. If the pilot won’t stay lit, the problem is usually related to the thermocouple, a heat-sensitive electrode that signals the gas valve to stay open when the pilot is on.
How do you clean a propane fire pit?
Wipe It Down
Prepare warm, soapy water and use a damp cloth to wipe down the fire pit. Focus on cleaning the burner and the edge of the fire pit, which is likely utilized as a tabletop or footrest. It is important to keep the burner clean so that the fuel can flow through it without difficulty.
Can I bypass a thermocouple?
So if you want to bypass the thermocouple you have to get rid of the spring mechanism. You can bypass the spring mechanism by simply using a screwdriver to pop out the little e-clip and take the valve off and problem solved.
How do I know if my thermocouple is bad?
If you can’t get the flame to light at all, and you’re sure the gas is on, there’s probably an obstruction in the pilot tube. If the flame lights and goes out when you release the gas control knob after holding it in for the recommended 20 to 30 seconds, that’s the sign of a thermocouple malfunction.
Can you clean a thermocouple?
The best way to clean your thermocouple is to use either a piece of steel wool or the coarse side of a sponge to gently clean off any soot or other remnants. You can use a pencil eraser to clean between the threads of the screw that connects the thermocouple to the control valve of your system.