Question: Can you use flex gas line in attic?

Most homes have gas lines in their attic, walls & basements. CSST flexible gas lines in the attic are a prime candidate for damage from lightning strikes. Especially if they are not protected with Bonding to ensure electrical energy is carried away from the pipe (versus carried by the pipe).

Can you run flex gas line in attic?

FYI: Gas lines can indeed be run in the attic. Also, you don’t have to run gas lines through the slab. Flexible connectors may not be permitted on gas furnaces, water heaters, space heaters, etc. …

Can you run CSST in an attic?

CSST runs from the gas meter or propane source to gas appliances through the basement, walls and attic, depending on the type of construction. It can also be installed with portions of black iron pipe or copper.

Can you use flexible gas line inside?

Three- or six-foot long and accessible: The flexible connectors can’t go through walls, floors or ceilings, nor can they be concealed. The flexible connector length usually is limited to 3 feet except for gas ranges and clothes dryers. For these appliances, 6 feet generally is allowed.

Can you use PEX for gas lines?

Yes you can, but because the terms PE and PEX have so often been used interchangeably it’s important to specify your intended use before purchasing polyethylene pipe for your project.

IMPORTANT TO KNOW:  Is smoking at a gas station dangerous Reddit?

Can gas lines run under slab?

GAS LINE UNDER SLAB.



Dana, 2001 CPC 1211.4 – No gas pipe shall be installed in or on the ground under any building or structure unless installed in a gastight conduit, and all exposed gas piping shall be kept at least 6″ above grade or structure.

Can you run gas pipe in ceiling?

The pipework is in a sealed void and therefore needs to be vented. The gas pipe will be in a sealed at one en plastic pipe that does not open into the ceiling void.

What is a CSST gas line?

Corrugated Stainless Steel Tubing (CSST) is a thin-walled metallic tubing product that can be used as alternative gas piping material to steel pipe. CSST may have been used in your structure if it was built after 1990, or its gas piping system has been replaced or modified since then.

What is best pipe for gas line?

CSST tubing, or corrugated stainless steel tubing, is good for installing gas appliances. These corrugated pipes can bend around corners reducing the number of joints and fittings. Easier to work with than steel pipe and weighs a lot less. Certification through manufacturer is recommended before installing CSST.

Can I run my own gas line?

Yes in most jurisdictions you can. It’s a very good DIY project and it can be done very safely. First you need to obtain the proper permit. … Never attempt to do work on, or install gas piping without first checking with local code authorities and obtaining the proper permits.

IMPORTANT TO KNOW:  Quick Answer: Is propane or natural gas more dangerous?
Oil and Gas Blog